STE-93

DO NOT BREATHE THE SOLVENT FUMES.

ALODINE PREVENTS CORROSION.

MOVE THE LEVER BACK TO ITS INITIAL POSITION.

INITIALLY, THE SPEED INCREASES TO 3000 RPM.

START THE TEST AT 2000 RPM.

PUT OIL INTO THE GEARBOX WITH A SYRINGE.

PUT THE CORROSION PREVENTIVE OIL INTO THE PUMP WITH A SYRINGE.

MAKE SURE THAT THE END OF THE SAFETY WIRE CANNOT CAUSE INJURY TO PERSONNEL.

BEND THE ENDS OF THE LOCKING WIRE TO PREVENT INJURY.

THE INNER SURFACE OF THE PART IS BLACK.

MAKE SURE THAT THE SYSTEM IS OFF BEFORE YOU DRAIN THE FUEL.

MAKE SURE THAT THE DEMISTING SYSTEM DOES NOT OPERATE.

THE UNIT COMPARES THE INPUTS FROM THE TWO SENSORS TO THE COMPUTER.