THE BEND IN THE PIPE MUST HAVE A 30 mm RADIUS.
THE RADIUS OF THE CURVE MUST BEA MINIMUM OF 8 mm.
BEND THE PIPE TO THE CORRECT RADIUS.
THE RADIUS OF THE CURVE MUST BEA MINIMUM OF 8 mm.
BEND THE STRIP OF METAL TO MAKE A CURVE.
CUT THE CABLE INTO THREE EQUAL LENGTHS.
CUT AND DISCARD THE LOCKWIRE.
SET THE SWITCH TO THREE CYCLES A MINUTE.
OPERATE THE ACTUATOR THROUGH THREE CYCLES.
还没有评论,快来发表第一个评论!